Pump Plunger Assemblies
Grainger Black Pipe Nipple Threaded 1-1/2x2-1/2In
The Grainger Approved 1/2 in. Black Iron Pipe Nipple is made from seamless carbon steel pipe. It has National Pipe Thread ends that comply with ANSI standards. The nipple has a pressure rating of 850 psi at 70°F. It can be used in steam, air, gas, oil, and water applications. The nipple measures 6 in. long and has an outside diameter of 0.840 in. It weighs 0.22 lbs. The nipple is zinc coated for corrosion resistance. It conforms to ASTM A733 standards.
Grainger Black Pipe Nipple Threaded 1x8 In
The Grainger 14J810 is a 14-inch diameter, 8-inch tall plastic pail with lid that has a 10 quart capacity. It is made from durable HDPE plastic in a cylindrical shape with a bail handle for easy lifting and pouring. The snap-on lid creates an airtight seal to keep contents protected. This USA-made pail is ideal for storing and transporting a variety of items including food, liquids, hardware, and more. With its sturdy build and sealing lid, it can be used for numerous applications in industrial, commercial, and residential settings.
BURKLE INC OTAL foot pump PP, tube Ø 0.87 in. (22 mm), pump cap. 7.93 gal. (30l)/min
The OTAL foot pump with PP delivery tubes is a reliable, flexible and cost-effective pump for filling liquids.
Various delivery tubes with different diameters and flow rates are available to meet specific requirements.
The PP delivery tubes offer good resistance to weak acids, alkalis and detergents. The outlet can be turned up to prevent dripping.
The OTAL foot pump with PP delivery tubes is easy to use and durable. It is the ideal choice for cost-effective and reliable fluid transfer.
BURKLE INC Thread adapter S 63x4 inner - G 2" inner, white
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
Perkin Elmer US LLC Magazine for Liquid Sample Sealer
The Liquid Sample Sealer is used to seal volatile, non-viscous, non-corrosive samples in either the 4 µL aluminum capsules (02400642) or 30 µL aluminum capsules (00090709).
Grainger Black Pipe Nipple Threaded 1/2x10 In
The Grainger 14J786 is a 14-inch diameter, 7-blade circular saw blade with a 5/8-inch arbor hole and a 0.094-inch kerf. It has 80 teeth and is designed for crosscutting and ripping hardwood, softwood, plywood, and pressure-treated lumber. This carbide-tipped blade features Perma-SHIELD coating to resist corrosion and provide smoother, faster cuts. Its thin kerf design also reduces cutting friction. This saw blade is ideal for table saws, miter saws, radial arm saws, and chop saws. With proper care, this durable blade will provide smooth, clean cuts and long service life.
AVANTOR MASTERFLEX (VWR LLC) DRIVE MFLEX L/S 600R SS E/IP
Masterflex L/S MasterSense™ Drive with EtherNet/IP and MasterflexLive, Stainless Steel Housing, 0.1 to 600 rpm; 115/230 VAC, Avantor
BURKLE INC Thread adapter S70x6 (Mauser) outer- S64x5 outer,green
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
Bellco Glass, Inc. 10 Hole Large Flange Headplate for Omni Vessels
200mm large flange headplate 10-port6@ 1/4" OD4@ 1/2" OD1 center for drive motor1964-90115 1/4" compression fitting1964-90120 1/2" compression fitting1964-90125 5/16" compression fitting (thermowell)Headplates are used with the large flange vessels to seal and to also provide ports for access to the interior of the vessel. The 18-port headplate is most used since more components can be fitted into its ports. The impeller is always positioned in the center drive port and a variety of components i.e. probe (1/2"), harvesting tubes (1/4" or 1/2"), thermowells (5/16") can be added as needed. Headplates and all stainless components of the bioreactor systems are electropolished to seal the surface against bacterial contamination that might occur with a rough surface. MADE IN THE USA. O-ring replacements: a554-30 6 eacha554-42 4 eacha554-13 1 each
